Sluice valve

SYANDARD SPECIFICATION

Size Range

50mm to 1600mm (Upto 1200 ISI –Marked)

Mfg/ Design Std.

IS 14846 (PD) BS 5163 / BS 5150

Type of Valve

Non Rising & Rising Stem

Pressure Rating

PN 1.0/ PN 1.6 /Class-125

Flanged End

IS: 1538 (Tab-4&6),On request – BS/ANSI/AWWA/DIN/BSEN

Body & Other C.I Parts

C.I to IS: 210 Gr. FG-200/260 or BS 1452 or ASTM A126

Seat Ring & Stem Nut

L.T.B to IS: 318 Gr.2/S.S., IS: 6603 or AISI-304/316

Stem

S.S to IS :6603/AISI-410/304/316 or Brass

Actuation

Cap, handwheel, Gearing, Electric/pneumatic Actuator, Chain Wheel,

Additional Accessories

By-pass, Shoe Channel, Indicator, Thrust Bearing, Darin Plug,

Air Plug, Extn. shafting and hand stock arrgt. & Locking Arrgt.

Special Features

• Low Pressure loss across the valve
• Face to face dimension available in ANSI B 16.10/DIN 3216/MSS-SP70
• Suitable for clear water upto 45”C and 5000ppm turbidity.
• Low operating torque ensuring easy operation.
• Drop tight closure under full pressure
• Suggested to install in vertical position. (Can be used in any position)
• Available in gland less design & sealing with ‘O’ ring packing
• Long service life and leak - tightness even after thousands of open/close cycles operation.
• Available in cast steel & S.G. Iron